Tile
Showing about half of the tile in place.
The Schluter A-100 aluminum tile edge mitered at 45 degrees.
:
Cutting Tile
With the tile saw I cut each edge to the back line. I then made multiple cuts about 1/4" apart to the back line creating tabs. Using a glass scoring tool I scribed the back line. I snapped of the 1/4" tabs then using the nippers nipped as much off as I dared. Back at the tile saw I tilted the tile up into the blade as it cut to a near 90 degree cut along the back line and made lots of these cuts until the back line was established.
The tiles are in place, the mess is cleaned up, and the mortar is drying.
:
Grout
All the grout is in and the tiles are cleaned.
The grout color is a close match. Silicone caulk is next.
